Huawei Mate 20X 5G - Page 80

Use NFC to Share Data Quickly
NFC lets you share data across two devices quickly without the hassle of pairing. Simply place the NFC
detection areas of both your devices in close proximity to each other, and then you can transfer les
and other data quickly between the two NFC-enabled devices.
NFC
Use NFC to send data: Open Settings, then touch Device connectivity and enable NFC and
Huawei Beam. Select the les to be sent and touch Share > Huawei Beam. Keep your Phone
unlocked and the screen on. Place the NFC detection areas of both devices close together. Once a
connection is established, the transmitting device will play an audio prompt and the sharing screen
will minimise. Touch the transmitting device's screen to begin sending les.
Receive les over NFC: Open Settings, then touch Device connectivity and enable NFC and
Huawei Beam. Keep your Phone unlocked and the screen on. Place the NFC detection areas of both
devices close together. Once a connection is established, the transmitting device will play an audio
prompt. After the prompt, please wait for the le transfer to complete. Received les are saved by
default to the Beam folder of your Files.
l
If there is an option to enable Read and write/P2P on the NFC screen, ensure that it is
enabled. Features may vary depending on your network provider.
l Not all devices support NFC.
Device Connection
76