• Go to > Project screen to return to wireless projection.
• In Control Panel, touch
to expand the shortcut switch panel (depending on your
device model), and touch Wireless Projection to exit wireless projection.
• Swipe down from the upper left edge of your device to display the notication panel and
touch DISCONNECT to exit wireless projection.
Project the Current App to a Large-screen Device
You can project the current app on your device to a large-screen device (for example, a
Huawei Vision), while continuing to use and browse other apps on your device.
App projection is supported on large-screen devices that support the Cast+/Miracast
protocol.
The gures are for reference only.
Projecting an app: After enabling wireless projection on your device, open the app you wish
to project, go to > to project the app to the large-screen device, and minimise the
app, which will appear as a oating ball to the side on the device screen.
Settings
122
To Next Page
Loading...
