Huawei Mate X3 - Page 63

Connect Your Device to Your Laptop by Scanning the QR Code
1 Open PC Manager on your laptop, and go to My devices > My Phone > Connect, and
click on the QR code in the upper left corner.
2 Swipe down from the upper right edge of your device to display Control Panel, and touch
in the shortcut switch panel; you could also open Camera, touch , and select
Code scanner instead. Then scan the QR code displayed on your laptop.
3 Follow the onscreen instructions on your device and laptop to complete the connection.
Connect Your Device to Your Laptop Using Super Device
1 Enable Bluetooth and Wi-Fi on your laptop, and make sure that it is logged in to the same
HUAWEI ID as your device.
2 Swipe down from the upper right edge of your device to display Control Panel, and touch
or to search for nearby available devices.
3 Touch the name of the laptop or drag the laptop to the local device, and follow the
onscreen instructions to complete the connection.
Connect Your Device to Your Laptop via a USB Cable
1 Use a USB cable to connect your device to your laptop.
2 Open PC Manager on your laptop.
3
Conrm the connection on your device.
If you have canceled the connection on your device and wish to re-establish the
connection, open PC Manager and go to My devices > My Phone > Connect > Other
ways to connect > USB.
Disconnect Your Device from Your Laptop
After you have nished using Multi-Screen Collaboration, you can disconnect your devices
using the following methods:
• Open PC Manager on your laptop, and go to My devices > My Phone > Disconnect.
• Swipe down from the upper left edge of your device to display the
notication panel, and
touch Disconnect.
• Touch , and touch Disconnect.
• If your device and laptop are connected via a USB cable, remove the cable to disconnect
them.
Drag to Transfer Files Between Your Device and Laptop
After connecting your device to a laptop, you can transfer
les between them to work more
eciently.
Smart Features
60