Huawei ME906s LTE M.2 - Page 14

HUAWEI ME906s LTE M.2 Module
Hardware Guide
Description of the Application Interfaces
Issue 05 (2019-03-25)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
14
Pin
No.
Pin Name
Pad
Type
Description
Parameter
Min.
(V)
Typ.
(V)
Max.
(V)
Comments
14
Notch
-
-
-
-
-
-
-
15
Notch
-
-
-
-
-
-
-
16
Notch
-
-
-
-
-
-
-
17
Notch
-
-
-
-
-
-
-
18
Notch
-
-
-
-
-
-
-
19
Notch
-
-
-
-
-
-
-
20
Reserved
-
Reserved for future use,
please keep it not
connected in the host side.
-
-
-
-
-
21
CONFIG_0
O
Not Connected internally.
-
-
-
-
The
module is
configured
as WWAN-
SSIC 0.
22
Reserved
-
Reserved for future use,
please keep it not
connected in the host side.
-
-
-
-
-
23
Wake_On_W
WAN#
O
It is open drain and active
low.
WWAN to wake up the
host.
V
OL
0
-
0.48
The
maximum
I
OL
is 40
mA.
24
Reserved
-
Reserved for future use,
please keep it not
connected in the host side.
-
-
-
-
-
25
BodySAR_N
I
Hardware pin for BodySAR
detection.
When it is High, No TX
power backoff (default).
When it is Low, TX power
backoff.
V
IH
1.26
-
3.6
-
V
IL
–0.3
-
0.3
26
GPS_DISABL
E#
I
GPS disable function
When it is High, GPS
function is determined by
software AT command.
When it is Low, GPS is
turned off.
V
IH
1.26
-
3.6
-
V
IL
–0.3
-
0.3
27
Ground
PI
Ground
-
-
0
-
-
28
Reserved
-
Reserved for future use,
please keep it not
connected in the host side.
-
-
-
-
-