Huawei MediaPad 7 Lite S7-931w - Page 28

MediaPad 7 Lite Maintenance Manual
INTERNAL
2012-10-08
Huawei Confidential
Page 28 of 82
1. Place the air suction ball on
the decorating part on the rear
cover, press the air suction ball,
and quickly pull out the air
suction ball. A gap is formed
between the decorating part and
the rear cover.
2. Use the guitar pick to
separate the decorating
part from the rear cover.
3. Disassemble the decorative
cap and rear cover.
Decorative cap
MediaPad 7 Lite
4. Remove screws.