Huawei MediaPad M5 Lite - One-Touch Printing

Device Connection
Use Bluetooth to Share Data
Connect your Tablet to another device over Bluetooth to share data, import and export contacts, and
set up Internet tethering.
Use Bluetooth to send les: Ensure that your Tablet is within Bluetooth range of the other device
(10 m or 32 ft). You can then establish a Bluetooth connection and share multimedia les, web pages,
contacts, documents, and apps between the two devices. Open Files, touch and hold the le that
you want to send, and then go to More > Share > Bluetooth. Follow the onscreen instructions to
enable Bluetooth. When the other device is detected (Bluetooth must be enabled and the device must
be visible), touch the name of the device to establish a connection and start sending les.
Receive les over Bluetooth: From the home screen, swipe down from the status bar, open the
shortcuts panel, and then touch to enable Bluetooth. Touch Accept on the le transfer
notication to begin receiving the les. Received les are saved to the bluetooth folder in Files by
default.
Import or export contacts over Bluetooth: Open Contacts and go to > Settings >
Import/Export to perform the following:
l Import contacts: Touch Import via Bluetooth and follow the onscreen instructions to establish a
Bluetooth connection with the other device. Contacts from the other device will then be imported
to your Tablet automatically.
l Export contacts: Touch Share contacts, select the contacts that you want to share, touch
and select Bluetooth. Follow the onscreen instructions to establish a Bluetooth connection with the
other device. Those contacts selected will be exported from your Tablet to the other device
automatically.
Transfer Data Between Your Tablet and a USB Device
USB OTG (USB On-The-Go) allows you to transfer data directly between your Tablet and other devices
(such as phones, tablets, cameras, and printers) without requiring a computer. You can also use a USB
OTG cable to connect your Tablet directly to a USB storage device and transfer les.
Transfer data between your Tablet and a USB storage device
You can use an OTG cable to access USB storage devices (including USB drives and card readers)
directly from your Tablet.
l
This feature is only available on Tablets with USB OTG support.
l If your Tablet has a USB Type-C port, you will need to purchase a Huawei-certied Micro USB to
USB Type-C adapter or a USB OTG cable with a USB Type-C connector.
36