15
10 Multimedia
Taking an all-focus photo
In all-focus mode, you can change the focal point of a photo after it's been taken.
1. On the home screen, touch
Camera.
2. Touch
> All-focus to switch to all-focus mode.
3. Touch
to take a photo.
4. Go to Gallery and select the photo that was taken in all-focus mode.
5. Touch
to enter all-focus editing mode.
6. Touch an area of the photo to change the focal point to that location.
7. Touch
.
Taking a panoramic photo (Certain models only)
Your HUAWEI MediaPad T2 10.0 Pro enables you to easily take panoramic photos without
a wide-angle lens.
1. On the home screen, touch
Camera.
2. Touch
> Panorama to switch to panorama mode.
3. Touch
to start shooting.
4. Follow the onscreen instructions and move your device slowly in one direction.
5. Touch
to stop shooting. The camera automatically merges all the photos captured
to create one panoramic photo.
indicates photos taken in all-focus mode.