Huawei MediaPad T2 Pro - 4 Network Connection; Connecting to a Wi-Fi Network; Connecting to a Wi-Fi Network (WPS)

15
4 Network Connection
Connecting to a Wi-Fi network
Select from detected Wi-Fi networks.
1 In Home Screen, Settings → Wi-Fi → Wi-Fi ( )
･ Wi-Fi is enabled.
･ Tap Wi-Fi again to disable Wi-Fi ( ).
2 Tap access point → Enter password → Connect
･ Tablet is connected.
･ Password (indicated by WEP, WPA, KEY, etc.) may be found on a label on your Wi-
Fi router. For details, contact the vendor of the router. For public wireless LAN services,
inquire about the password with your ISP.
･ Omit password entry for unprotected access points.
Note
 To connect to a Wi-Fi network that uses a hidden SSID, Tap Add network → Enter
required network information (SSID etc.) to connect.
 Enabling Wi-Fi increases power consumption. To save battery power, disable Wi-Fi when
not in use.
Connecting to a Wi-Fi network (WPS)
If your wireless router supports WPS (Wi-Fi Protected Setup), use WPS to quickly connect
to a Wi-Fi network.
1 In Home Screen, Settings → Wi-Fi → Wi-Fi ( )
･ Wi-Fi is enabled.
･ Tap Wi-Fi again to disable Wi-Fi ( ).