Huawei MU609 - 5 Internal Protocol Stack Application Scenarios; Initializing Internet Services; Reference Process

HUAWEI MU609 HSPA LGA Module
Application Guide
Internal Protocol Stack Application Scenarios
Issue 02 (2013-09-18)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33
5 Internal Protocol Stack Application
Scenarios
5.1 Initializing Internet Services
5.1.1 Reference Process
Command
Description
AT^IPINIT="1234","card","card"
In this example provided in the left
column, the APN is 1234, and the user
name and password are both card.
After this command is excuted, the
PDP active process will be caused.
OK
AT^IPINIT?
Query the obtained IP and DNS
addresses.
^IPINIT: 1,
"192.168.70.59","1234","172.22.44.200
","172.22.44.201"
OK
Note:
Internal protocol stack supports UART ports only.