Charging
Charge in Turbo charging Mode
Enable Turbo charging to give your phone a quick boost when you need it most.
1 Go to Optimizer >
, and make sure that Smart tune-up is enabled.
2 Remember to charge your phone using the standard HUAWEI SuperCharge charger and
data cable that came with it.
3 You can enable Turbo charging in any of the following ways:
• Before the charging animation eects disappear, when Touch & hold the center of
the screen to Turbo charge displays, touch and hold down on the center of the
screen, until your phone vibrates and Turbo charging displays.
• Unlock the screen, swipe down from the upper left corner of the screen to display
Notication Panel, and touch Turbo charge in the Turbo charge message box.
If you wish to disable Turbo charging mode, touch Stop Turbo charging in the Turbo
charge message box on Notication Panel, or remove and re-insert the data cable. If you
select Ignore, the Turbo charge message box will appear after your phone has restarted.
When your phone is charging in Turbo charging mode, its temperature may increase
slightly. This is normal and does not indicate any issue with your device.
Essentials
39