Switch to a Dierent Output Device During Playback
When playing music or videos through your earphones, you can quickly switch playback to
another device without having to unplug your wired earphones or disconnect your Bluetooth
earphones.
1 Enable Bluetooth on your phone and connect it to wired earphones or a Bluetooth audio
device (such as Bluetooth earphones, a Bluetooth speaker, or a vehicle-mounted device).
2 After pairing is successful, you will see the Current audio output device or Current audio
input/output device card if you swipe down the notication panel on your phone. Touch
on the card to display the audio output devices that are currently available.
Select the device you want to switch the audio to.
If your phone supports wired earphones with a non-Type-C port, the audio output
channel of your phone will be switched from This device to the wired earphones by
default.
Smart Features
27
To Next Page
Loading...
