Huawei OceanStor 18800 V3

To Next Page

To Previous Page

NOTE

– If you want to enable other ports for the firewall, add the port IDs to the

FW_SERVICES_EXT_TCP configuration item. For example, if you want to enable port 22,

type FW_SERVICES_EXT_TCP="30002 22".

– If a virtual machine (VM) is used to deploy the arbitration software, enable the firewall port of

the physical machine where the VM is deployed.

XXX@Linux:~# ## Type: string

# 9.)

# Which TCP services _on the firewall_ should be accessible from

# untrusted networks?

# Format: space separated list of ports, port ranges or well known

# service names (see /etc/services)

# Examples: "ssh", "123 514", "3200:3299", "ftp 22 telnet 512:514"

# Note: this setting has precedence over FW_SERVICES_ACCEPT_*

FW_SERVICES_EXT_TCP="30002"

4. Check whether the firewall configuration of the quorum server takes effect.

Enter the CLI of the quorum server, go to any directory, run the rcSuSEfirewall2 restart

command in any directory to restart the firewall. Then run the iptables -L command to

check whether the firewall configuration takes effect. If the ACCEPT tcp -- anywhere

anywhere tcp dpt:pago-services2 information is displayed in the command output, the

firewall configuration takes effect.

XXX@Linux:~# iptables -L

ACCEPT tcp -- anywhere anywhere tcp dpt:pago-services2

Step 2 Go to the command-line interface (CLI) of the arbitration software.

In any directory of the quorum server's operating system, run the qsadmin command to open

the arbitration software. The arbitration software page is displayed.

XXX@Linux:~# qsadmin

start main!

Waiting for connecting to server...

admin:/>

NOTE

After the arbitration software is started, run the help command to check help information and understand

the commands that are required during the configuration process.

Step 3 Add the service IP address and port ID of the quorum server to the arbitration software.

In the CLI of the arbitration software, run the add server_ip command to add the service IP

address and port ID of the quorum server to the arbitration software for management.

admin:/>add server_ip ip=192.168.6.31 port=30002

OceanStor V3 Series

HyperMetro Feature Guide for File

4 Configuration

Issue 05 (2018-01-30) Huawei Proprietary and Confidential

Huawei OceanStor 18800 V3 - Page 76