NOTE
Usage is unchangeable after it is configured.
l A storage pool whose Usage is Block Storage Service allows you to create LUNs only.
l A storage pool whose Usage is File Storage Service allows you to create file systems only.
Step 6 In Disk Domain, select the disk domain that the storage pool belongs to.
Step 7 In Storage Medium, select the storage tiers needed for the storage pool and set related
parameters.
1. Select storage tiers that meet service requirements.
2. Set basic properties for the storage tiers. Table 4-10 describes related parameters.
OceanStor V3 Series
HyperMetro Feature Guide for File
4 Configuration
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
88
To Next Page
Loading...
