Precaution
The properties of pairs in a consistency group will not be changed after the properties of a
consistency group are modified, but the working properties change to the properties of the
existing consistency group.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose Data Protection > Remote Replication > Remote Replication
Consistency Group.
Step 3 Select the consistency group whose properties you want to modify and click Properties.
The Properties of Consistency Group dialog box is displayed.
Step 4 Modify properties of the consistency group. Table 7-3 describes the related parameters.
Table 7-3 Parameters of a consistency group
Parameter
Description Setting
Name Name of a consistency group. [Value range]
l The name must
be unique.
l The name must
start with a digit
or letter and
contain only
letters, digits,
periods (.),
underscores (_),
and hyphens (-).
l The name
contains 1 to 31
characters.
[Example]
ConsistentGroup001
Description Description of a consistency group. [Example]
None
OceanStor V3 Series
Remote Replication Feature Guide for Block
7 Managing Consistency Groups
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
133
To Next Page
Loading...
