7
Preparation Item Source Example Value
User name and password used for logging in to a
CIFS share
Service provider
User name: cifsuser
Password: Admin@123456 H2
Primary group
Service provider Usergroup H3
Maintenance Terminal: Adding a User (User Group) That Can Be Accessed by a CIFS Share
User/User group
Service provider
a Local Authentication User
I1
User
Service provider cifsuser I2
Permission level
Service provider Read-write I3
Maintenance Terminal: Creating a Logic Port
Name
Service provider logicalip J1
IP Address Type
Service provider IPv4 Address J2
IPv4 Address
Service provider 192.168.29.30 J3
Subnet Mask
Service provider 255.255.255.0 J4
Primary Port
Service provider CTE0.L1. IOM1.P2 J5
IP Address Floating
Service provider Enable J6
Failback Mode
Service provider Automatic J7
Active Now
Service provider Enable J8
User group to which a user belongs. Users must belong
to a primary group.
When the primary port is disabled, the IP
address will be floated to another port that can
be used.
Failback mode of the IP address:
Automatic and Manual.
Click More and choose Set Security Policies
to set a security policy for the password of the
local authentication user in the file system.
For security purpose, you are advised to
select Password Validity Period (Days). After
you select this item, your password will never
expire. The default validity period is 180 days.
After the password expires, the user cannot
access shares. You can set a password again
and modify the password security policy.
To Next Page
Loading...
