Huawei OceanStor 2600 V3 - Page 55

3 Running/Alarm
indicator of the
power module
4 Link/Active
indicator of the
management
network port
5 Speed indicator of
the management
network port
6 Running/Alarm
indicator of the
backup power
module
7 Power indicator of
the controller
8 Alarm indicator of
the controller
9 Indicator of the mini
SAS HD expansion
port
10 Link/Active
indicator of the GE
electrical port
11 Speed indicator of
the GE electrical
port
Table 4-12 describes the indicators on the rear panel of the controller enclosure.
Table 4-12 Description of the indicators on the rear panel of a controller enclosure
Module
No. Indicator Status and Description
Interface
module
1 Power
indicator of
the interface
module/Hot
Swap button
of the
module
l Steady green: The interface module is running
properly.
l Blinking green: The interface module receives a
hot swap request.
l Steady red: The interface module is faulty.
l Off: The interface module is powered off or can
be hot-swappable.
OceanStor 2600 V3
Product Description
4 Hardware Architecture
Issue 09 (2019-05-15) Copyright © Huawei Technologies Co., Ltd. 47