Table 4-17 iSCSI link parameters
Parameter Description Setting
Immediate Data The immediate data
function can speed up
data transfer in the
scenario where iSCSI
replication links transfer
service data between
storage arrays.
[Example]
Enable
Controller Name of the local
storage device's
controller connected to
the remote storage
device.
[Example]
XXX0.A
Local Port Local storage device's
Ethernet port connected
to the remote storage
device.
NOTE
This host port cannot be
used for Ethernet port
bonding. Otherwise, the
HyperMetro service fails.
[Example]
XXX0.A0.P0
IP Address IP address of the
Ethernet port on the
remote storage device.
NOTE
This host port cannot be
used for Ethernet port
bonding. Otherwise, the
HyperMetro service fails.
[Example]
192.168.26.12
Username The user name of the
machine-machine user.
[Value]
mm_user
Password The password of the
machine-machine user.
[Value]
mm_user@storage
TCP/IP Port Ethernet port number on
the remote storage
device.
[Example]
3260
l Add an FC Link
a. Set Link Type to FC.
b. In the Fibre Channel link list, select one or multiple Fibre Channel links.
c. Set parameters for the FC link. Table 4-18 lists related parameters.
OceanStor V3 Series
HyperMetro Feature Guide for File
4 Configuration
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117
To Next Page
Loading...
