Prerequisites
A HyperMetro domain has been successfully configured for the storage system.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose Data Protection > HyperMetro > HyperMetro Domain.
Step 3 Choose Properties. The Properties of HyperMetro Domain dialog box is displayed.
NOTE
Alternatively, you can right-click the HyperMetro domain and choose Properties.
Step 4 In Name and Description, change the name and description of the HyperMetro domain.
Step 5 In the Quorum Server area, modify the quorum server information.
NOTE
Click Add or Remove to add or remove the quorum server. In V300R006C00, a maximum of one quorum
servers can be added. In V300R006C10 and later versions, a maximum of two quorum servers can be added.
Step 6 Click OK.
----End
5.1.2.3 Deleting a HyperMetro Domain
If a HyperMetro domain is no longer needed, you can delete it.
Prerequisites
The related HyperMetro Pair has being deleted.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Data Protection > HyperMetro > HyperMetro Domain.
Step 3 Select a HyperMetro domain that you want to delete and click Delete.
The security alert dialog box is displayed.
Step 4 Select Only delete the configuration information about the local device if the local device
is disconnected from the remote device based on site requirements.
NOTE
If you do not select this option, you cannot delete the HyperMetro domain when the local device is
disconnected from the remote device.
Step 5 Select I have read and understand the consequences associated with performing this
operation. and click OK.
Step 6 The Execution Result dialog box is displayed indicating that the operation succeeded.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
144
To Next Page
Loading...
