5.1.3.2 Modifying HyperMetro Pair Properties
Through this operation, you can modify the speed and recovery policy of a HyperMetro pair.
Prerequisites
A HyperMetro pair has been successfully configured for the storage system.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose Data Protection > HyperMetro > HyperMetro Pair.
Step 3 Click the HyperMetro Pair tab.
The HyperMetro Pair management page is displayed.
Step 4 Select a HyperMetro pair whose properties you want to modify and click Properties.
The Properties of HyperMetro Pair dialog box is displayed.
Step 5 On the General tab page, you can view the link information about the HyperMetro pair. Click
the Synchronize Information tab to modify related parameters. Table 5-8 explains the
related parameters.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
150
To Next Page
Loading...
