2. In the CLI of the quorum server, run the show white_list command to check whether the
white list of the quorum server contains the SNs of the two storage arrays in the
HyperMetro solution.
– If yes, go to Step 2.
– If no, run the add white_listsn=? command in the CLI of the quorum server to add
the SNs of the storage arrays to the white list of the quorum server. If the quorum
link still fails to be added, go to Step 2.
Step 2 Replace the certificates of the storage array and quorum server.
1. In OceanStor DeviceManager of the storage array, export certificates used in the
HyperMetro scenario for a third-party Certificate Authority (CA) organization to
generate certificates. SeeConfigure Quorum Server Software to replace the certificates
for the storage array and quorum server.
2. After replacing the certificates, add the quorum link again.
– If the link is added successfully, no further action is needed.
– If the link fails to be added, contact Huawei technical support.
----End
Suggestion and Summary
None
OceanStor V3 Series
HyperMetro Feature Guide for File
7 Troubleshooting
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
183
To Next Page
Loading...
