5.2.2 Modifying HyperMetro Pair Properties
Through this operation, you can modify the speed and recovery policy of a HyperMetro pair.
Prerequisites
A HyperMetro pair has been successfully configured for the storage system.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Go to the NAS HyperMetro page.
The operation path varies with user types:
l System user: Click vStore, select the desired vStore, and click Details to go to the
vStore view. Choose Data Protection > HyperMetro.
l vStore user: In the vStore view, choose Data Protection > HyperMetro.
Step 3 Click the HyperMetro Pair tab.
The HyperMetro Pair management page is displayed.
Step 4 Select a HyperMetro pair whose properties are to be modified and click Properties.
The Properties of HyperMetro Pair dialog box is displayed.
Step 5 On the General tab page, you can view the link information about the HyperMetro pair. Click
the Synchronize Information tab and modify parameters as required. Table 5-18 describes
related parameters.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
167
To Next Page
Loading...
