Figure 5-31 Installing a disk module
Step 7 Wait about two minutes and check the status of the Running and Alarm/Location indicators
on the disk module to determine whether the disk module is successfully installed. Figure
5-32 shows the locations of the Running and Alarm/Location indicators.
l If the Running indicator is steady on and the Alarm/Location indicator is off, the disk
module is successfully installed.
l If the Running indicator is off or the Alarm/Location indicator is steady on, the newly
installed disk module is faulty, the disk module slot is faulty, or the disk module is
incorrectly installed.
OceanStor Dorado V3 Series
Parts Replacement
5 Replacing FRUs
Issue 05 (2019-01-30) Copyright © Huawei Technologies Co., Ltd. 103
To Next Page
Loading...
