Figure 5-121 Removing the quorum server
3. Pull out the quorum server along the guide rails away from the rack. See step (2) in
Figure 5-121.
4. Place the removed quorum server on the ESD platform.
Step 3 Install the spare part.
1. At least two persons lift the spare part on two sides and move it to the rack.
2. Place the spare part on the guide rails and push it into the rack, as shown in Figure
5-122.
OceanStor Dorado V3 Series
Parts Replacement
5 Replacing FRUs
Issue 05 (2019-01-30) Copyright © Huawei Technologies Co., Ltd. 200
To Next Page
Loading...
