Figure 4-22 Installing a power module
Step 8 Connect the power cable and secure the AC power cables with retention clips.
1. Press the locker of the retention clip outwards (as shown in a of step 1 in Figure 4-23),
and meanwhile slide the retention clip to the connection part of the AC power cable (as
shown in b of step 1 in Figure 4-23).
Figure 4-23 Securing the AC power cables with retention clips
OceanStor Dorado V3 Series
Parts Replacement
4 Replacing CRUs
Issue 05 (2019-01-30) Copyright © Huawei Technologies Co., Ltd. 27
To Next Page
Loading...
