Step 6 Take the spare part out of its ESD bag.
Step 7 Insert the spare part into the empty slot until it clicks into place, as shown in Figure 4-40.
Figure 4-40 Installing a BBU
Step 8 Open the handle of the spare part, insert the spare part into the empty slot, and close the
handle, as shown in Figure 4-41.
Figure 4-41 Installing a power module
OceanStor Dorado V3 Series
Parts Replacement
4 Replacing CRUs
Issue 05 (2019-01-30) Copyright © Huawei Technologies Co., Ltd. 40
To Next Page
Loading...
