Keyword and Value Description Default Value
-ti LUN ID
The target LUN ID. When the target LUN is a
"internal LUN", the value ranges from 0 to 511.
When the target LUN is a "external LUN" or "third-
part LUN", the value ranges from 100000 to
101023.
You can query the information by running the
showhycpluninfo command.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
l The showhycpluninfo -i HyperCopy ID command queries basic information of all target
LUNs for HyperCopies, including the LUN name, LUN ID, link ID, link state, target LUN
capacity, and status of the target LUN.
l The showhycpluninfo -i HyperCopy ID -ti LUN ID queries detailed information of a
specific target LUN for the HyperCopy. The information includes the name, type, capacity,
state, number, WWN, and WWPN of the target LUN. If the target LUN is in an external
array, the information (including the external link ID, link type, link status, and external
array WWN) of the external array is displayed.
Example
Query detailed information of the external target LUN with the ID of 101023 on the HyperCopy
with the ID of 1.
OceanStor: admin> showhycpluninfo -i 1 -ti 101023
===================================================
HyperCopy LUN Information
---------------------------------------------------
HyperCopy ID | 1
Destination LUN Name | src0
Destination LUN ID | 101023
Destination LUN Link ID | 0
Destination LUN Link Status | Normal
Destination LUN Link Type | FC
Destination LUN Type | External LUN
Destination LUN Capacity(MB) | 1024
Destination LUN Status | Normal
Destination LUN WWN | --
Destination LUN WWPN | --
Destination LUN Number | --
Array Name | --
Array WWN | 2100135790864213
===================================================
OceanStor S2600 Storage System
Command Reference 9 Value-Added Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-31
To Next Page
Loading...
