Huawei OceanStor S2600 - Page 224

Keyword and Value Description Default Value
-swwn source LUN WWN
The source LUN WWN. This command is
used only when the source LUN is in a third-
party array. The value includes 32
hexadecimal numbers, each two number are
grouped, and groups are separated by colons.
None.
-swwpn source LUN WWPN
The source LUN WWPN. This command is
used only when the source LUN is in a third-
party array. The value includes 16
hexadecimal numbers.
None.
-sln source LUN number
The source LUN number. This number is
available only when the swwppn parameter
is valid. The value ranges from 0 to 511.
None.
-tli target LUN link ID
The link ID of the target LUN. The value
ranges from 0 to 255.
None.
-ti target LUN ID
The target LUN ID. The value ranges from 0
to 511.
None.
-twwn target LUN WWN
The target LUN WWN. This command is
used only when the target LUN is in a third-
party array. The value includes 32
hexadecimal numbers, each two number are
grouped, and groups are separated by colons.
None.
-twwpn target LUN WWPN
The target LUN WWPN. This command is
used only when the target LUN is in a third-
party array. The value includes 16
hexadecimal numbers
None.
-tln target LUN number
The target LUN number. This number is used
only when the twwpn parameter is valid. The
value ranges from 0 to 511.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-40 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)