Huawei OceanStor S2600 - Page 60

Parameters
Keyword and Value Description Default Value
-i host IP address The IP address of the FTP
server. It is requested that the
FTP server can access the
storage network.
None.
-di cofferdisk ID The location of the
configuration file stored in
the coffer. The value ranges
from 0 to 3:
l 0: The coffer disk stored in
slot 0.
l 1: The coffer disk stored in
slot 1.
l 2: The coffer disk stored in
slot 2.
l 3: The coffer disk stored in
slot 3.
NOTE
When the storage system is in
the normal state, the
configuration files stored in the
coffer disks in slots 0, 1, 2, and
3 are the same. When the
configuration files are different,
the storage system switches to
the safe mode. It is
recommended to back up the
configuration files periodically.
When the system fails, you can
restore the settings of the
system by using the
importconf command. For
details on the importconf
commands, see 4.4.4
importconf.
None.
-u user name The user name of the FTP
server.
None.
-p password The user password of the FTP
server.
None.
-f file The path where the alarm file
is stored on the FTP server,
and the file name.
None.
Modes
Normal mode and safe mode.
4 System Management Commands
OceanStor S2600 Storage System
Command Reference
4-12 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)