Huawei OceanStor S2600 - Showsesversion

Level
Administrator level and guest level.
Usage Guidelines
None.
Example
Query the SES version's MAC address about all controllers and expander modules.
OceanStor: admin> showsesmac
Subrack ID MAC Address
0 00:18:82:f3:15:52
4.6.4 showsesversion
Function
The command showsesversion is used to query the SES Firmware version about the controllers
or the expander modules.
Format
showsesversion [ -s subrack ID [ -i board ID ] ]
Parameters
Keyword and Value
Description Default Value
-s subrack ID The enclosure ID.
The value ranges from 0 to 7.
None.
-i board ID The ID of the controller or the
expander module.
The value can be 0 or 1.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
OceanStor S2600 Storage System
Command Reference 4 System Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-27