Huawei OceanStor S2600 - Trapip Management Commands

Keyword and Value Description Default Value
-addinitiator -initiator
initiator name1 ...initiator
nameN
Adds an iSCSI host port.
-initiator initiator
name1 ...initiator nameN
indicates the name of an
iSCSI host port to be added.
You can enter multiple
names at a time.
None.
-delinitiator -initiator
initiator name1 ...initiator
nameN
Deletes a specified iSCSI
host port.
-initiator initiator
name1 ...initiator nameN
indicates the name of an
iSCSI host port to be deleted.
You can enter multiple
names at a time.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
The command chap is used to set CHAP-related functions for iSCSI host ports.
NOTE
The command sets can be used only when the storage system uses the S2600i or S2600C controller
enclosure.
Example
Add a CHAP user. Set the name to chap1 and the password to 1234567890123.
OceanStor: admin> chap -adduser -user chap1 -password 1234567890123
Are you sure to create the CHAP user(y/n)?y
4.11 TrapIP Management Commands
TrapIP management commands are used to manage the Trap IP.
4.11.1 showtrapip
4.11.2 addtrapip
4.11.3 deletetrapip
OceanStor S2600 Storage System
Command Reference 4 System Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-37