Huawei OceanStor S2600 - Figure 6-9 Remove the Faulty Expander Module; Figure 6-10 Install a New Expander Module

Figure 6-9 Remove the faulty expander module
Step 4 Put the removed expander module into the ESD-preventive bag.
Step 5 Take the expander module to be installed from the ESD-preventive bag.
Step 6 As shown in Figure 6-10, insert the expander module to be installed in the empty slot, and close
the spring leafs of the controller.
Figure 6-10 Install a new expander module
Step 7 Connect the connectors of the mini SAS cable to the expander module.
Step 8 According to the status of the power indicator and the alarm indicator on the expander module,
judge whether the expander module is successfully installed.
6 Replacing Parts
OceanStor S2600 Storage System
Troubleshooting
6-14 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-01-28)