Follow-up Procedure
After the optical module is replaced, label it to facilitate subsequent operations.
6.9 Running/Alarm Indicators on Power Modules, BBUs,
and Fan Modules
After powering on a storage system, you can check the operating status of a
power module, BBU, or fan module by viewing its indicators.
Running/Alarm Indicators on a 2 U Controller Enclosure
Figure 6-121 and Figure 6-122 show the indicators on the rear panel of a
controller enclosure.
Figure 6-121 Indicators on the rear panel of a controller enclosure (for 5110
V5/5110F V5/5300 V5)
Figure 6-122 Indicators on the rear panel of a controller enclosure (for 5300F
V5/5500 V5/5500F V5)
1
Running/Alarm indicator on a
power module
2 Running/Alarm indicator on a
BBU
Table 6-2 describes the indicators on the rear panel of a controller enclosure.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 128
To Next Page
Loading...
