Huawei OceanStor V5 Series - Page 138

Table 6-2 Indicators on the rear panel of a controller enclosure
No. Indicator Status and Description
1 Running/Alarm
indicator on a
power module
● Steady green: The power module is working
properly.
● Blinking green: The power input is normal but the
device is powered o.
● Steady red: The power module is faulty.
●
O: There is no external power input.
2 Running/Alarm
indicator on a
BBU
● Steady green: The BBU is fully charged.
● Blinking green (1 Hz): The BBU is being charged.
● Blinking green (4 Hz): The BBU is being
discharged.
● Steady red: The BBU is faulty.
Running/Alarm Indicators on a 3 U Controller Enclosure
Figure 6-123 shows the indicators on the front panel of a controller enclosure.
Figure 6-123 Indicators on the front panel of a controller enclosure
1
Running/Alarm indicator on a
BBU
2 Running/Alarm indicator on a
fan module
Table 6-3 describes the indicators on the front panel of a controller enclosure.
OceanStor V5 Series
Parts Replacement 6 Replacing CRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 129