Procedure
Step 1 (Optional) If only one power module is congured, power o the quorum server.
Step 2 Remove the AC power module.
1. Open the cable tie for the power cable. See Figure 7-99.
Figure 7-99 Opening a cable tie
2. Remove the power cable from the power module to be replaced. See Figure
7-100.
Figure 7-100 Removing a power cable
3. Press the spring on the power module in the arrow direction, and pull the
power module out of the slot while holding the handle. See steps (1) and (2)
in Figure 7-101.
OceanStor V5 Series
Parts Replacement 7 Replacing FRUs
Issue 15 (2019-12-30) Copyright © Huawei Technologies Co., Ltd. 249
To Next Page
Loading...
