No. Item Description
4 OPTICAL The optical port is equipped with a rubber plug and
connected to a ber for upstream transmission.
The type of the optical connector connected to the
optical port can be SC/APC.
5 Reset Press the button for a short time to reset the device,
or press the button for a long time (longer than 10s)
to restore the device to the default settings and
reset the device.
NOTE
Reset Huawei ONTs with caution. Otherwise, the ONTs
may fail to access the Internet. If an ONT cannot access
the Internet after a reset, contact your Internet service
provider.
Huawei OptiXstar EG8010Hv6-10
Quick Start for QR code 2 Connecting Cables
Issue 02 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. 4
To Next Page
Loading...
