Huawei OptiXstar EG8010Hv6-10 - Indicator Description; Indicator Status and Meaning

3 Indicator Description
Indicator Status Description
POWER Steady on The ONT is powered on.
O The power supply is cut o.
PON/LOS See the following table.
LAN Steady on The Ethernet connection is in the normal
state.
Blinking Data is being transmitted over the
Ethernet port.
O The Ethernet connection is not set up.
Status No.
PON Status LOS Status Description
1 O O The ONT is prohibited by the
upper-layer device or blinks
abnormally. Contact the
service provider for help.
2 Blinks twice a
second
Blinks twice a
second
3 Blinks twice a
second
O The ONT attempts to set up
a connection with its upper-
layer device.
4 Steady on O A connection is set up
between the ONT and its
upper-layer device.
Huawei OptiXstar EG8010Hv6-10
Quick Start for QR code 3 Indicator Description
Issue 02 (2022-11-02) Copyright © Huawei Technologies Co., Ltd. 5