3 Unpacking and Checking
Step 1 Verify that the cabinet package is intact. If any damage is found, notify the carrier
immediately.
Step 2 Remove the unloading ramp and unpack the cabinet. Ensure that the cabinet
exterior is in good condition and free of collision and scratches. If any damage is
found, notify the carrier immediately.
Step 3 Check the type and quantity of
ttings against the packing list. If some ttings are
missing or do not match the models in the packing list, record the information
and contact the supplier immediately.
----End
PDU8000 DC Combiner Cabinet
Quick Guide 3 Unpacking and Checking
Issue 02 (2022-08-10) Copyright © Huawei Digital Power Technologies Co., Ltd. 8
To Next Page
Loading...
