Figure 5-4 Partially tightening expansion bolts
Step 6 Use a socket wrench to tighten the expansion bolts in diagonal order.
Step 7 Install anchor
bae plates for the combiner cabinet.
1. Remove a total of four door sill fasteners from the front and rear.
Figure 5-5 Removing door sill fasteners
2. Install the front and rear anchor bae plates.
PDU8000 DC Combiner Cabinet
Quick Guide 5 Installing the Combiner Cabinet
Issue 02 (2022-08-10) Copyright © Huawei Digital Power Technologies Co., Ltd. 14
To Next Page
Loading...
