Huawei PDU8000 - Installing Rodent-Proof Meshes and Protective Panels at the Top

To Next Page

To Previous Page

6.8 Installing Rodent-proof Meshes and Protective

Panels at the Top

Step 1 Cut cable inlet and outlet holes in rodent-proof meshes based on the number and

specications of cables to be routed.

Figure 6-13 Cutting a rodent-proof mesh

Step 2 Reinstall the rodent-proof meshes on the combiner cabinet.

Step 3 Seal the gap between cables and the cabinet using sheets of sealing putty.

(Remove the paper protective

lm from the sealing putty and use the aluminum

foil lm together with the sealing putty.)

Figure 6-14 Filling a gap with a sheet of sealing putty

Step 4 Close the protective panels and tighten the screws.

----End

PDU8000 DC Combiner Cabinet

Quick Guide 6 Installing Cables

Other manuals for Huawei PDU8000