Huawei PDU8000 - 3 Overview; 3.1 Positioning; 3.2 Product Model

1. Connect the ground cable, as shown in the figure.
A ground terminal is typically
marked as .
2. Connect the input power cables, as shown in the figure.
(Optional) ATS input
(Optional) Circuit breaker input
Rear view
(Optional) Wiring for a UPS Installed Outside a Cabinet
NOTE
12
The actual number of cables to be
connected and the positions vary
depending on the project design.
3. Connect output power cables for the air conditioner and IT cabinets, as shown in the figure.
Connecting air conditioner cables
Connecting IT cabinet and load cables
Rear view
Rear view
Rear view
NOTE