5.4.4.1 Top Cable Routing
The following procedure applies to a dual-input PDC.
Procedure
Step 1 Remove the rodent-proof meshes at the top and put them aside.
Figure 5-30 Removing rodent-proof meshes at the top
Step 2 Remove the transparent covers of the N bar and input copper bar, and put the
covers aside.
Figure 5-31 Removing the transparent covers of the N bar and input copper bar
Step 3 Connect the equipotential ground cables for the cabinet.
PDU8000 Modular Precision PDC V2.0
User Manual 5 Installation Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 55
To Next Page
Loading...
