Drag the end points to the measurement result.
For best results, keep a distance of 0.3–1.5 m (about 1–5 ft.) between your phone and
the object.
Measure Area
Currently, only the area of circles and rectangles can be measured via HUAWEI AR
Measure.
1 On the HUAWEI AR Measure screen, go to Objects >
or Area (depending on your
device model).
2 Align the lens with the surface on which the object is resting and slowly move your phone
to locate the plane.
3 When your phone the upper surface of the object, it will automatically display a
frame that matches the size of the object surface. When the frame matches the size of the
plane, touch
. Your phone will automatically display the result.
4 Drag the tips of the object to the measurement result.
Measure Volume
On the HUAWEI AR Measure screen, go to Objects >
or touch Volume. Both automatic
and manual measurements are supported.
• If the icon cannot be found in the it means that your phone does not
support automatic volume measurements.
• Currently, only the volume of cubes and cuboids can be measured.
• Make sure the object is not placed against a wall and there is a distance of 1 to 1.5 m
(3.3 to 5 ft.) between your phone and the object.
Manually measure volume
1 If your phone supports automatic measurements, touch
to disable auto mode
Frame the surface on which the object is resting in the and slowly move your
phone to locate the plane.
2 When the plane is move your phone to point
at the object's bottom edge
and touch
to add a starting point.
3 Move your phone slowly so that
travels along the long edge of the object until it
reaches the end. Then touch
.
4 Move your phone to create a frame for the bottom of the object. When the frame
matches the bottom length and width of the object, touch
.
Apps
111
To Next Page
Loading...
