Set Face Unlock
On the Face Recognition screen, touch Unlock device and select an unlock method.
• Direct unlock: The screen will unlock once facial recognition is successful.
• Swipe to unlock: Swipe on the screen to unlock the screen after facial recognition is
successful.
Certain phones also support the Require eye contact feature, which can be enabled on the
Face Recognition screen. Once enabled, you'll need to keep your eyes open while unlocking
the device with your face.
• If you wish to disable face unlock, touch Unlock device > .
• If you have enabled PrivateSpace, you'll only be able to use face unlock in MainSpace.
If you have added multiple users, you'll only be able to use face unlock with the Owner
account.
Access App Lock with Face Recognition
On the Face Recognition screen, enable Access App Lock, and follow the onscreen
instructions to add your facial data to App Lock.
You can then touch a locked app on your home screen and use face recognition to access the
app.
Link Your Face with Password Vault
Access the Face Recognition screen and enable usernames and passwords.
When logging in to an app, you can use Face Recognition to automatically in the account
name and password saved in Password Vault.
Bolster Your Device Security, with Face Recognition
Enable Require trusted device when using Face unlock to ensure that your phone will only
unlock when it detects your face and is connected to a trusted device.
This feature is disabled by default. To enable it, go to the Face Recognition settings screen,
touch Require trusted device, turn on the Require trusted device switch, and follow the
onscreen instructions to complete the settings.
A trusted device can be any Bluetooth device that can be used for unlocking purposes,
such as earphones, a watch, or a band.
Set Accessibility Mode for Face Recognition
Once Accessibility mode for Face Recognition has been enabled, your face will be
even with your eyes closed if you are in ScreenReader mode.
To enable Accessibility mode, perform the following steps:
1 Go to Settings > Accessibility features > Accessibility > ScreenReader, and enable
ScreenReader.
Settings
129
To Next Page
Loading...
