1 Go to Settings > Battery (or Optimizer > ) and enable Wireless reverse charging.
2 Power on the device to be charged and place it on the center of the back of your phone.
Do not place any metal objects between your phone and the device to be charged.
3 If the device does not start charging within a few seconds, adjust its position and try
again.
Charge in Turbo charging Mode
Enable Turbo charging to give your phone a quick boost when you need it most.
1 Go to Settings > Apps & services, touch Optimizer in APP SETTINGS, and make sure
that Smart tune-up is enabled.
2 Remember to charge your phone using the standard HUAWEI SuperCharge charger and
data cable or HUAWEI SuperCharge Wireless Charger that came with the product.
3 You can enable Turbo charging in any of the following ways:
• Before the charging animation disappear, when Touch & hold the center of
the screen to Turbo charge displays, touch and hold down on the center of the
screen, until your phone vibrates and Turbo charging displays.
• Unlock the screen, swipe down from the upper left corner of the screen to display
Panel, and touch Turbo charge in the Turbo charge message box.
If you wish to disable Turbo charging mode, touch Stop Turbo charging in the Turbo
charge message box on Panel, or remove and re-insert the data cable. If you
select Ignore, the Turbo charge message box will appear after your phone has restarted.
When your phone is charging in Turbo charging mode, its temperature may increase
slightly. This is normal and does not indicate any issue with your device.
Essentials
46
To Next Page
Loading...
