Huawei Pura 70 - Page 58

your device model), touch Wireless Projection, and follow the onscreen instructions to
project the app to the large-screen device.
• If wireless projection is enabled, open the app you wish to project on your phone, touch the
capsule at the top of the screen, and follow the onscreen instructions in the Live view,
to project the app to the large-screen device.
Once the wireless projection is successful, the projected app will be minimized and appear as
a  ball to the side on the phone screen.
To control a projected app, you can touch the projected app in the  ball to display
the app's  window, which can be used to control the app. You can also adjust the
volume on the large-screen device from the  window.
• Apps in split-screen or  mode can't be projected.
• To safeguard your privacy, this feature can't be used once your device screen has been
locked.
You can exit app projection in any of the following ways:
• Touch the
capsule at the top of the phone screen, then touch in the Live view to
switch to mirror projection, or touch
to exit wireless projection.
• Touch the  ball for your device to display the app's  window, then touch
in the  window to switch to mirror projection, or touch to exit wireless
projection.
• Touch and hold the  ball and drag it to the
at the bottom of the screen, to exit
wireless projection.
Tap to Project Your Phone to a Vision
With just one tap, you can project videos or games from your phone to a Vision to enjoy
them on a larger display.
Before using this feature, please update the Vision to the latest version.
1 On the home page of the Vision, go to Settings > Remote & connections > Multi-Device
Collaboration, and enable Multi-Device Collaboration, while keeping the screen on.
2 Swipe down from the upper right corner of your phone to display Control Panel, touch
to expand the shortcut switch panel, and enable NFC, Wi-Fi, and Bluetooth.
3 Tap the NFC area (around the rear camera) on the phone against the non-key area near
the bottom of the Vision remote control, hold for 2 to 3 seconds, and follow the
instructions on your phone to select the device to which you wish to project.
4 When connecting for the  time,  the connection on your phone and Vision as
prompted.
Smart Features
55