EasyManua.ls Logo

Huawei Quidway S6700 series - Page 148

Huawei Quidway S6700 series
295 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
# Configure the VLANs mapping instance 2 as the protected VLANs in domain 2. Configure
VLAN 10 as the control VLAN.
[UPEC] rrpp domain 2
[UPEC-rrpp-domain-region2] protected-vlan reference-instance 2
[UPEC-rrpp-domain-region2] control-vlan 10
[UPEC-rrpp-domain-region2] quit
l Configure UPE D.
# Configure the VLANs mapping instance 1 as the protected VLANs in domain 1. Configure
VLAN 5 as the control VLAN.
[UPED] rrpp domain 1
[UPED-rrpp-domain-region1] protected-vlan reference-instance 1
[UPED-rrpp-domain-region1] control-vlan 5
[UPED-rrpp-domain-region1] quit
# Configure the VLANs mapping instance 2 as the protected VLANs in domain 2. Configure
VLAN 10 as the control VLAN.
[UPED] rrpp domain 2
[UPED-rrpp-domain-region2] protected-vlan reference-instance 2
[UPED-rrpp-domain-region2] control-vlan 10
[UPED-rrpp-domain-region2] quit
# Configure the VLANs mapping instances 1 to 3 as the protected VLANs in domain 3.
Configure VLAN 20 as the control VLAN.
[UPED] rrpp domain 3
[UPED-rrpp-domain-region3] protected-vlan reference-instance 1 2 3
[UPED-rrpp-domain-region3] control-vlan 20
[UPED-rrpp-domain-region3] quit
l Configure UPE E.
# Configure VLAN 20 as the control VLAN in domain 3.
[UPEE] rrpp domain 3
[UPEE-rrpp-domain-region3] protected-vlan reference-instance 1
[UPEE-rrpp-domain-region3] control-vlan 20
[UPEE-rrpp-domain-region3] quit
l Configure UPE F.
# Configure VLAN 20 as the control VLAN in domain 3.
[UPEF] rrpp domain 3
[UPEF-rrpp-domain-region3] protected-vlan reference-instance 1
[UPEF-rrpp-domain-region3] control-vlan 20
[UPEF-rrpp-domain-region3] quit
l Configure UPE G.
# Configure VLAN 20 as the control VLAN in domain 3.
[UPEG] rrpp domain 3
[UPEG-rrpp-domain-region3] protected-vlan reference-instance 1
[UPEG-rrpp-domain-region3] control-vlan 20
[UPEG-rrpp-domain-region3] quit
Step 4 Create RRPP rings.
l Configure UPE A.
# Configure UPE A as a transit node of ring 1 in domain 1 and specify primary and secondary
ports on UPE A.
[UPEA] rrpp domain 1
[UPEA-rrpp-domain-region1] ring 1 node-mode transit primary-port xgigabitethernet
Quidway S6700 Series Ethernet Switches
Configuration Guide - Reliability 3 RRPP Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
138

Table of Contents

Related product manuals