Huawei quidway s7700 - Page 161

[Quidway-vlan3] port gigabitethernet 3/0/0 4/0/0
[Quidway-vlan3] quit
Step 4 Configure VLAN 4.
# Configure the super-VLAN.
[Quidway] vlan 4
[Quidway-vlan4] aggregate-vlan
[Quidway-vlan4] access-vlan 2 to 3
# Configure the VLANIF interface.
[Quidway] interface vlanif 4
[Quidway-Vlanif4] ip address 100.1.1.12 255.255.255.0
[Quidway-Vlanif4] quit
Step 5 Configure the personal computers.
Configure the IP address for each personal computer and make them reside in the same network
segment with VLAN 4.
After the preceding configuration, the personal computers and the Switch can ping each other,
but the computers in VLAN 2 and the computers in VLAN 3 cannot ping each other.
Step 6 Configure proxy ARP.
[Quidway] interface vlanif 4
[Quidway-Vlanif4] arp-proxy inter-sub-vlan-proxy enable
Step 7 Verify the configuration.
After the preceding configuration, the computers in VLAN 2 and the computers in VLAN 3 can
ping each other.
----End
Configuration Files
Configuration file of the Switch
#
sysname Quidway
#
vlan batch 2 to 4
#
vlan 4
aggregate-vlan
access-vlan 2 to 3
#
interface Vlanif4
ip address 100.1.1.12 255.255.255.0
arp-proxy inter-sub-vlan-proxy enable
#
interface GigabitEthernet1/0/0
port link-type access
port default vlan 2
#
interface GigabitEthernet2/0/0
port link-type access
port default vlan 2
#
interface GigabitEthernet3/0/0
port link-type access
port default vlan 3
#
interface GigabitEthernet4/0/0
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 3 VLAN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
144