Huawei quidway s7700 - Page 237

<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] vlan batch 2 3
Step 2 Configure selective QinQ on interfaces of Switch A and Switch B.
# Configure GE 1/0/1 of Switch A.
[SwitchA] interface gigabitethernet 1/0/1
[SwitchA-GigabitEthernet1/0/1] port link-type hybrid
[SwitchA-GigabitEthernet1/0/1] port hybrid untagged vlan 2 3
[SwitchA-GigabitEthernet1/0/1] port vlan-stacking vlan 100 to 200 stack-vlan 2
[SwitchA-GigabitEthernet1/0/1] port vlan-stacking vlan 300 to 400 stack-vlan 3
[SwitchA-GigabitEthernet1/0/1] quit
# Configure GE 1/0/1 of Switch B.
[SwitchB] interface gigabitethernet 1/0/1
[SwitchB-GigabitEthernet1/0/1] port link-type hybrid
[SwitchB-GigabitEthernet1/0/1] port hybrid untagged vlan 2 3
[SwitchB-GigabitEthernet1/0/1] port vlan-stacking vlan 100 to 200 stack-vlan 2
[SwitchB-GigabitEthernet1/0/1] port vlan-stacking vlan 300 to 400 stack-vlan 3
[SwitchB-GigabitEthernet1/0/1] quit
Step 3 Configure other interfaces.
# Add GE 1/0/2 of Switch A to VLAN 2 and VLAN 3.
[SwitchA] interface gigabitethernet 1/0/2
[SwitchA-GigabitEthernet1/0/2] port link-type trunk
[SwitchA-GigabitEthernet1/0/2] port trunk allow-pass vlan 2 3
[SwitchA-GigabitEthernet1/0/2] quit
# Add GE 1/0/2 of Switch B to VLAN 2 and VLAN 3.
[SwitchB] interface gigabitethernet 1/0/2
[SwitchB-GigabitEthernet1/0/2] port link-type trunk
[SwitchB-GigabitEthernet1/0/2] port trunk allow-pass vlan 2 3
[SwitchB-GigabitEthernet1/0/2] quit
Step 4 Verify the configuration.
# View the configuration of each interface on Switch A.
<SwitchA> display current-configuration interface gigabitethernet 1/0/1
#
interface GigabitEthernet1/0/1
port hybrid untagged vlan 2 to 3
port vlan-stacking vlan 100 to 200 stack-vlan 2
port vlan-stacking vlan 300 to 400 stack-vlan 3
#
return
<SwitchA> display current-configuration interface gigabitethernet 1/0/2
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 2 to 3
#
return
# View the configuration of each interface on Switch B.
<SwitchB> display current-configuration interface gigabitethernet 1/0/1
#
interface GigabitEthernet1/0/1
port hybrid untagged vlan 2 to 3
port vlan-stacking vlan 100 to 200 stack-vlan 2
port vlan-stacking vlan 300 to 400 stack-vlan 3
#
return
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 5 QinQ Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
220