Huawei quidway s7700 - Page 248

l IPTV terminals can communicate with each other through the carrier network.
----End
Configuration Files
Only the configuration files of the Switches are provided:
l Configuration file of Switch A
#
sysname SwitchA
#
vlan batch 2 to 3
#
traffic classifier name1 operator or precedence 5
if-match vlan-id 100 to 200
traffic classifier name2 operator or precedence 10
if-match vlan-id 300 to 400
#
traffic behavior name1
nest top-most vlan-id 2
traffic behavior name2
nest top-most vlan-id 3
#
traffic policy name1
classifier name1 behavior name1
classifier name2 behavior name2
#
interface GigabitEthernet1/0/1
port hybrid untagged vlan 2 to 3
traffic-policy name1 inbound
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 2 to 3
#
return
l Configuration file of Switch B
#
sysname SwitchB
#
vlan batch 2 to 3
#
traffic classifier name1 operator or precedence 5
if-match vlan-id 100 to 200
traffic classifier name2 operator or precedence 10
if-match vlan-id 300 to 400
#
traffic behavior name1
nest top-most vlan-id 2
traffic behavior name2
nest top-most vlan-id 3
#
traffic policy name1
classifier name1 behavior name1
classifier name2 behavior name2
#
interface GigabitEthernet1/0/1
port hybrid untagged vlan 2 to 3
traffic-policy name1 inbound
#
interface GigabitEthernet1/0/2
port link-type trunk
port trunk allow-pass vlan 2 to 3
#
return
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 5 QinQ Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
231