Huawei quidway s7700 - Optional) Setting the Maximum Frame Length on the Ethernet Interface; Optional) Enabling Flow Control

Context
Do as follows on the S7700 where you need to configure interface groups.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
port-group port-group-name
The interface group view is displayed.
Step 3 Run:
group-member interface-type interface-number
The Ethernet interface is added to the interface group.
----End
1.4.5 (Optional) Setting the Maximum Frame Length on the
Ethernet Interface
Context
Do as follows on the S7700 where you need to set the maximum frame length.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The Ethernet interface view is displayed.
Step 3 Run:
jumboframe enable [ value ]
The maximum length of the frame is set on the Ethernet interface.
By default, the maximum frame length allowed by an interface is 9216 bytes.
----End
1.4.6 (Optional) Enabling Flow Control
Context
Do as follows on the S7700 where you need to enable flow control.
Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet 1 Ethernet Interface Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10